Hello everyone! We all hope you are having a great finals week and wrapping up a successful semester! To celebrate the spirit of creativity, we are kicking off the annual IEEE Winter Design Competition RIGHT NOW!
Zombies are coming, and you're the only one that can stop them! Build something that will be useful in a zombie apocalypse and compete to win some really great prizes! The competition will be held right when we get back in February, so you can keep yourself occupied for all of Winter Break!
Full contest rules and more information can be found on the "Winter Design Competition" tab.
We look forward to seeing the amazing ideas you guys and gals come up with... but the zombies are coming faster than you think, so get building!
Thursday, December 18, 2014
Wednesday, December 3, 2014
Workshop 5 TODAY!!
Workshop 5 is TODAY, Wednesday Dec. 3rd at 7:00pm in Scott 213! Come enjoy FREE PIZZA and the final workshop of this semester!
This workshop will quickly cover the remaining parts in the kit, a small project, and information about the Winter Design Competition. Specific parts needed include:
This workshop will quickly cover the remaining parts in the kit, a small project, and information about the Winter Design Competition. Specific parts needed include:
- Arduino and Computer
- 1 M Ohm Resistor
- Pencil (NOT a pen, we will use these to mark a notecard)
That's it! We will provide notecards. Mechanical pencils should be fine.
See you all tonight!
Monday, November 17, 2014
Workshop 4: Secret knock THIS WEDNESDAY
Hello everyone! We're getting toward the end of our workshops here, with the next one being this Wednesday! We will go over motors, servos, NPN transistors, and the piezo sensor in your kit, using all of these to make a door lock that opens with a secret knock!
Where: Scott 231
When: Wednesday, 11/19/2014, 7:00PM-9:00PM
What to bring: Your laptop and kit.
If you don't have a kit, as always we sell them for $35. But if you have your own set of supplies, we will be using the following:
(1) Arduino
(1) DC Motor
(1) Servo motor
(1) NPN Transistor - 2N3904
(1) 1 MOhm Resistor
(1) Piezo element
(1) 1N4001 Diode
FREE PIZZA will be provided! We hope to see you all there :)
Where: Scott 231
When: Wednesday, 11/19/2014, 7:00PM-9:00PM
What to bring: Your laptop and kit.
If you don't have a kit, as always we sell them for $35. But if you have your own set of supplies, we will be using the following:
(1) Arduino
(1) DC Motor
(1) Servo motor
(1) NPN Transistor - 2N3904
(1) 1 MOhm Resistor
(1) Piezo element
(1) 1N4001 Diode
FREE PIZZA will be provided! We hope to see you all there :)
Monday, October 27, 2014
Workshop 3 Information - THIS WEDNESDAY!
Workshop 3 is coming up! It will be held THIS WEDNESDAY (Oct. 29th) at 7:00pm in Scott 231 (same room as workshop 2).
To adequately participate in this workshop, you will need:
To adequately participate in this workshop, you will need:
- Computer with the Arduino IDE installed
- Arduino Uno
- Breadboard
- 3x LEDs
- RGB LED
- 3x 330 Ohm Resistors
- 3x 470 Ohm Resistors
- 1x 10k Ohm Resistor
- TMP36 Temperature Sensor IC
- Photocell (light dependent resistor)
Of course, these can all be found in your kits if you have one. This workshop will cover analog I/O and RGB LEDs!
As always, FREE PIZZA is provided. If you don't have a kit but want one, WE ARE STILL SELLING KITS! It is not too late!
Feel free to email us with questions: csuieee@gmail.com
Saturday, October 25, 2014
Workshop 2 Make-up Video
The video for Workshop 2 is being exported and will be available for viewing shortly! I tried to over everything from the actual workshop, but as always, send us an email for any questions.
Check back on the Workshops tab for the link! Twitch streaming can be a nasty beast, but I am finally getting the hang of it. Thank you all for being patient as we learn along side you!
Check back on the Workshops tab for the link! Twitch streaming can be a nasty beast, but I am finally getting the hang of it. Thank you all for being patient as we learn along side you!
Sunday, October 19, 2014
Workshop #2 THIS WEDNESDAY
Workshop 2 is coming up THIS WEDNESDAY, October 22nd!
The workshop will be held at 7:00pm in Scott 231. As usual, FREE pizza is provided!
For this workshop, you will need your Arduino kit OR the following list of items:
The workshop will be held at 7:00pm in Scott 231. As usual, FREE pizza is provided!
For this workshop, you will need your Arduino kit OR the following list of items:
- Computer
- Arduino
- 3 LEDs (preferably red, yellow, and green)
- 5 resistors, 3x 330 ohm and 2x 10k ohm
- 2 Pushbuttons
- Jumpers/wires (we will have some extra as well)
- Breadboard (or mini breadboard)
This workshop will cover digital I/O as well as some basic electronics principles. Join us in Scott 231 or watch LIVE on our twitch channel: www.twitch.tv/csuieee
If you missed the first workshop, YOU CAN STILL COME! These are meant to be well-rounded workshops for people of all skill levels.
If you don't have a kit or some of the hardware, come and buddy up with a partner!
Wednesday, October 15, 2014
Arduino Workshop 1!
Thank you to everyone who came to the first Arduno workshop tonight. Everyone was enthusiastic and eager to learn and that makes us excited for the future workshops and the competition!
The materials for the workshop are now posted on the Workshops page, under Arduino Workshop 1. Please don't hesitate to contact us with any questions you might have!
The materials for the workshop are now posted on the Workshops page, under Arduino Workshop 1. Please don't hesitate to contact us with any questions you might have!
Subscribe to:
Posts (Atom)